Reset Synchronized King back to Split KingUpdated a month ago

If you have a King setup with two synchronized PowerLayer Twin XL frames and wish to un-synchronize them, each PowerLayer controller must be factory reset. This feature allows you to easily switch between King and Split King configurations as your preferences change over time.

Factory Reset Process:

1. Fold down the PowerLayer and locate the controller on each PowerLayer frame.
2. On each controller, press and hold the Controller LED button until it blinks green.
3. Release the button, then press and hold it again for 10 seconds to complete the factory reset.

Re-Pairing the Remote Controls:

After resetting to your desired configuration, you’ll need to re-pair the remotes with each PowerLayer frame.

1. Fold down the PowerLayer and locate the controller.
2. Confirm that the PowerLayer is powered on and the LED light is illuminated on the controller box.
3. Press and hold the Pairing button on the controller. The LED will blink green to indicate pairing mode.
4. Press and hold any button on the remote to pair it with the controller. Pairing is complete when the controller’s LED stops blinking.

For a step by step walkthrough on resetting the controller and pairing the remote control, check out our video guide here: PowerLayer Remote Pairing & Controller Reset