Pairing Two Twin XL PowerLayers to Create a Single King LayerUpdated 6 months ago
If you have two Twin XL PowerLayers and would like to synchronize them to function as a unified King bed, this guide will walk you through the pairing process. Once paired, the two frames will operate together smoothly, allowing you to enjoy the benefits of a single King-sized configuration. Follow the steps below to ensure proper setup:
Prepare the PowerLayers
- Fold down both Twin XL PowerLayers and locate their controllers.
- Confirm that both PowerLayers are powered on and that the LED light on each controller box is illuminated.
Activate Pairing Mode on the First Controller
- Press and hold the pairing button on one of the PowerLayer controllers until the LED begins blinking green, indicating it is in pairing mode.
Pair with the Second Controller
- Press and hold the pairing button on the second PowerLayer controller. The LED will blink once, and the LED on the first controller will stop blinking, indicating successful pairing.
Confirmation
- Once the LED on the first controller stops blinking, your PowerLayers are paired as a single King unit.
- Note: Occasionally, the LED light may continue blinking even if pairing is successful. Try adjusting the frames using your remote to confirm that pairing is complete.